论文标题
分离的剪切带的成核特性
Nucleation properties of isolated shear bands
论文作者
论文摘要
剪切条带或沿狭窄带的强烈菌株的定位是塑料不稳定性,对在各种材料和长度尺度的材料故障中具有重要意义。在本文中,我们报告了三种模型合金中单个孤立剪切带的成核的一系列实验。使用高速原位成像和平行力测量研究了分离带和特征应力的成核动力学。结果证明了带核所需的临界剪切应力。成核应力对正常应力几乎没有依赖,并且与剪切模量成正比。这些特性与晶体固体中错位滑移开始的那些特性相似。流量模式从剪切带变为均相塑性流的变化是在低于成核应力的应力水平上发生的。列出了发生这两种对比度流量模式的应变,应变速率和温度域的相位图。我们的工作使剪切带成核的解释是由于(应力辅助)脱位屏障的分解而引起的晶格不稳定性,并在应力和激活能量方面具有定量的实验支持。
Shear banding, or localization of intense strains along narrow bands, is a plastic instability in solids with important implications for material failure in a wide range of materials and across length-scales. In this paper, we report on a series of experiments on the nucleation of single isolated shear bands in three model alloys. Nucleation kinetics of isolated bands and characteristic stresses are studied using high-speed in situ imaging and parallel force measurements. The results demonstrate the existence of a critical shear stress required for band nucleation. The nucleation stress bears little dependence on the normal stress and is proportional to the shear modulus. These properties are quite akin to those governing the onset of dislocation slip in crystalline solids. A change in the flow mode from shear banding to homogeneous plastic flow occurs at stress levels below the nucleation stress. Phase diagrams delineating the strain, strain rate and temperature domains where these two contrasting flow modes occur are presented. Our work enables interpretation of shear band nucleation as a crystal lattice instability due to (stress-assisted) breakdown of dislocation barriers, with quantitative experimental support in terms of stresses and the activation energy.