论文标题
130nm Sige BICMOS的40GB/s线性重新放置具有多波段均衡
A 40Gb/s Linear Redriver with Multi-Band Equalization in 130nm SiGe BiCMOS
论文作者
论文摘要
储层计算是预测湍流的有力工具，其简单的架构具有处理大型系统的计算效率。然而，其实现通常需要完整的状态向量测量和系统非线性知识。我们使用非线性投影函数将系统测量扩展到高维空间，然后将其输入到储层中以获得预测。我们展示了这种储层计算网络在时空混沌系统上的应用，该系统模拟了湍流的若干特征。我们表明，使用径向基函数作为非线性投影器，即使只有部分观测并且不知道控制方程，也能稳健地捕捉复杂的系统非线性。最后，我们表明，当测量稀疏、不完整且带有噪声，甚至控制方程变得不准确时，我们的网络仍然可以产生相当准确的预测，从而为实际湍流系统的无模型预测铺平了道路。
A linear redriver circuit implements multi-band equalization techniques to efficiently compensate for high-frequency channel loss and extend high-speed wireline link reach. Input and output stage emitter-follower buffers with dual AC and DC paths provide programmable low-frequency peaking for channel skin effect, while a continuous-time linear equalizer (CTLE) utilizes RC degeneration in the input stage for mid-band peaking and a subsequent feedback structure contributes to additional high-frequency peaking to compensate for the additional dielectric loss effects. A variable-gain amplifier (VGA) stage provides up to 7.1dB tunable gain and utilizes negative capacitive loads for bandwidth extension. Input and output return loss of -11.0dB and -12.2dB is respectively achieved at 20GHz with input and output T-coil stages that distribute the ESD circuitry capacitance. Fabricated in a 130nm SiGe BiCMOS process, the redriver achieves 23.5dB max peaking at 20GHz and supports a 1Vppd linear output swing. Per-channel power consumption is 115.2mW from a 1.8V supply.
