论文标题
预测的轨迹指导控制框架的地面车辆弥补了延迟
Predicted Trajectory Guidance Control Framework of Teleoperated Ground Vehicles Compensating for Delays
论文作者
论文摘要
如果延迟未得到适当的补偿,可以通过大型沟通延误严重降低遥控地面车辆的可操作性和驾驶性。本文提出了一个预测的轨迹指导控制(PTGC)框架,以补偿此类延误,从而提高了远程运行系统的性能。该PTGC框架的新颖性是,远程操作员预测在车辆方面预测了其延迟的历史控制命令和环境的激光雷达3D点云,然后由预测的轨迹指导车辆。通过从直接控制循环中删除遥控器,提出的方法对延迟不太敏感,只要预测范围超过延迟,延迟就会得到补偿。人类在循环模拟实验旨在通过五个延迟水平的拟议方法评估远程操作性的性能。基于对方差的重复测量分析,得出的结论是,PTGC方法可以显着改善在较大延迟(> 200ms)下的遥控地面车辆的性能,例如任务完成时间(TCT),偏离中心线(D2C)(D2C)和转向工作(SE)。此外,结果还表明,远程操作员可以适应较小的延迟,并且在这种情况下,提出的方法无效。
Maneuverability and drivability of the teleoperated ground vehicle could be seriously degraded by large communication delays if the delays are not properly compensated. This paper proposes a predicted trajectory guidance control (PTGC) framework to compensate for such delays, thereby improving the performance of the teleoperation system. The novelty of this PTGC framework is that teleoperators intended trajectory is predicted at the vehicle side with their delayed historical control commands and the LiDAR 3D point cloud of the environment, and then the vehicle is guided by the predicted trajectory. By removing the teleoperator from the direct control loop, the presented method is less sensitive to delays, and delays are compensated as long as the prediction horizon exceeds the delays. Human-in-the-loop simulation experiments are designed to evaluate the teleoperation performance with the proposed method under five delay levels. Based on the repeated measurement analysis of variance, it is concluded that the PTGC method can significantly improve the performance of the teleoperated ground vehicles under large delays(>200ms), such as the task completion time (TCT), deviation to centerline (D2C) and steering effort (SE). In addition, the results also show that teleoperators can adapt to smaller delays, and the presented method is ineffective in such cases.